| | Sector | abcPower Plant | Tender Value | INR 22 Lakhs | | Location | Uttar Pradesh - India | Ref.No | 37591355 | | Closing Date | 09 - Jan - 2020 | | | | Supply of miscellaneous items for common auxiliary system, milling system, boiler non pressure parts and furnace bottom ash disposal system - 1-1/4” quick release coupling male & female (as per sample), 3/4” quick release coupling male & female (as per sample), 3/4”-3/4” male adopter (as per sample), 3/4”-1-1/4” bsp male adopter (as per sample), gasket for stub shaft od- 100 mm, id- 50 mm, thickness- 5.00 mm, material- neoprene, gasket for bearing housing for stub shaft, material- neoprene, head end shaft for ssc (as per sample), return trough idler shaft, (drawing no.- 35161/x/0300/4) (as per sample), snub/idler shaft for ssc (material-817 m40/en-24) (as per sample), valve plate r for a10vso45dfr/31, piston shoe for a10vso45dfr/31, retainer plate for a10vso45dfr/31, cylinder block for a10vso45dfr/31, drive shaft with 02 nos. of bearing and washer for a10vso45dfr/31, c.i. gate valve with wheel, pressure- 15 kg/cm2, size- 40 mm, c.i. gate valve with wheel, pressure- 15 kg/cm2, size- 100 mm, oil seal size- 28x40x7 mm, (double core), oil seal size- 55x72x7 mm, (double core), oil seal size- 15x35x7 mm, latern ring for c.g., size- 169.4x131x20 mm, material- gun metal, support ring size- 169.4x131x11.5, material- gun metal, gland follower, od- 160 mm, id.d- 100 mm, thickness- 6.0 mm, material- gun metal, thrust washer for stub shaft, od- 160 mm, id- 100 mm, thickness- 6.0 mm, material- gun metal, walker seal style-i, with eye spring, size- 130x170x16 mm, material- neoprene, walker seal style-ii, with eye spring, size- 130x170x16 mm, material- neoprene, spacer ring (as per sample), locking collar (m.s.), collar ring for c.g. with grub screw (as per sample), chuck nut (m.s.) (as per sample), locking washer (m.s.) (as per sample), bearing bracket for c.g., mark no. 35131/x/0050/13 (as per sample), material- cast iron or as per sample, blind cover for c.g. as per sample, material- cast iron , open cover for c.g. as per sample, material- cast iron, collar ring for ca-50 motor, material- ss304 (as per sample), collar ring for ma-141 motor, material- ss304 (as per sample), aluminium viscous filter, size- 600x600x25 mm (as per sample), aluminium viscous filter, size- 600x500x25 mm (as per sample), aluminium viscous filter, size- 500x500x25 mm (as per sample), fabric filter size- 500x500x25 mm (as per sample), phg belt b-77 (as per sample), phg belt b-55 (as per sample), "coupling assembly running under bell housing of hp-1 pump (one set coupling includes two halves with spidex, allen key, grub screw etc. with finished bore and key way on both side., specifications bore dia. motor side 42.00 mm and pump side bore dia. 40.00 mm, key way size 11.5 x 4.00 mm, one hole of 8 mm with allen screw on the middle section hub length (from inside) and at the 900 from key way., material aluminium alloy, , make rotex ktr 48 alu or equivalent (as per sample), spidex for above coupling assembly , make rotex ktr 48 alu or equivalent (as per sample), of 2x500 mw, btps. |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|