Product Detail :
|
Supply of swagelok components, ss tube cap 1/16" od, sc-11 cleaned, wire drill cleaned. part no. ss-100-cwdsc11, ss plug- 1/16" od, wire drill special sc-11 cleaned. part no. ss-100-pblbqwd, ss tube cap -1/8" od wire drill option, sc11 cleaned, part no.ss-200-cwdsc11, ss tube plug - 1/8" od wire drill option, special sc11 cleaned, part no. ss-200-pblbqwd, ss reducing union 1/8" od x 1/16" od end connection with wire drill option,sc11 cleaned , part no. ss-200-6-1wdsc11, ss tubing 1/8" od x 0.035" wt (ss-t2-s-035-6me) oxyclean, part no.tht-3r60-3.18-0.89, part no. ms-st-200", "pre-swaging tool for 1/4"" tube od , part no. ms-st-400", "snoop® liquid leak detector, 8 oz (236 ml) bottle, part no. ms-snoop-8oz)", "ptfe tape thread sealant 1/4 x576 in (6.4x1463 cm), part no. ms-str-4, "ss poppet 6000 psig (413 bar) check valve, 1/8 in. 25 psig (1.8 bar), wire drill option, sc-11 cleaned, part no. ss-204-1bq", ss front ferrule - 1/4" od with krytox lubrication sc11, part no. ss-403-1blbq, ss back ferrule for 1/4" swagelok tube fitting,sc11 cleaned, krytox ® 240 ac, part no. ss-404-1bq, ss reducer -1/16" od x 1/4" od tube stub, wire drill, sc-11 cleaned, part no. ss-100-r-4wdsc11, ss gasket for 3/4" iso parallel thread (rs) fitting, fluorocarbon fkm inner ring, part no. ss-12-rs-2v, ss union 1/8"" od- with wire drill option sc11 cleaned, part no. ss-200-6wdsc11", ss union tee 1/16" od- with wire drill option sc11 cleaned, part no. ss-100-3wdsc11, ss in -line particulate filter - 1/4" od, 0.5 micron pore size, sc11 cleaned, process sheet, part no. ss-4tf-05-sc11-47062, ss severe service high pressure union bonnet needle valve, 0.35 cv, 1/4" regulating stem, sc11, part no. ss-3hnrs4, ss male connector 1/8" od x 1/8" male bsp parallel thread end connection, wire drill, sc-11 cleaned, part no. ss-200-1-2rswdsc11, ss port connector, 1/4"" tube od sc11 cleaned , part no. ss-401-pc", ss high purity high pressure diaphragm sealed valve, 1/4" round handle, part no.ss-dss4, variable area flow meter, m series (metal tube) flow metres, measuring tube size 1/2" end connections 1/2" fnpt, measured flow range 1.1 to 11 nl/min, certificate of compliance, 5- point calibration record, material certification, part no. vaf-m4-1-101l-0-fg), variable area flow meter, m series (metal tube) flow metres, measuring tube size 1/2" end , ss male connector, wire drill option, sc 11 cleaned , part no. ss-400-1-8wdsc11", ss poppet 6000 psig (413 bar) check valve, 1/4" 1/3 psig (0.03 bar), wire drill option, sc-11 cleaned, part no. ss-chs4-wd-1/3-sc11 , "gap inspection guage, 1/16"" female nuts , part no. ms-ig-100 ", gap inspection guage, 1/8", 2mm and 3mm female nuts , part no. ms-ig-200 , "depth marking, tool 1/4"" tube od , part no. ms-dmt-400", , "ss tubing 1/16"" od x 0.014"" wt (ss-t1-s-014-6me), part no.tht-3r60-1.59-0.36", ss tube fitting, 1/16" odx1/8" customised end connection, wire drill, sc11 cleaned, part no. ss-100-7-0018wdsc11, ss ch series check valve, 1/16" od end connection, cracking pressure rating 10psi, sc-11 cleaned. pressure rating 600 bar, temp rating -23 to 37 deg c, part no. ss-chs1-10-sc11-38441, ss reducing union 1/4" od x 1/16" od with wire drill option sc-11 cleaned, part no. ss-400-6-1wdsc11, ss nut -1/16 od with wire drill option special clean sc11, part no. ss-102-1wdbq, ss male connector, 1/16" tube od x 1/8" male iso parallel thread, straight shoulder, part no. ss-100-1-2rs, sc11 cleaned, ss miniature quick - connect stem with valve, 0.05cv, 1/16" swagelok tube fitting, part no. ss-qm2-d-100-sc11, ss miniature quick - connect body 0.05cv, 1/16" swagelok tube fitting, part no. ss-qm2-b-100-sc11, ss miniature quick - connect stem with valve, 0.05cv, 1/8" swagelok tube fitting, part no. ss-qm2-d-200-sc11, ss miniature quick - connect body 0.05cv, 1/8" swagelok tube fitting, part no. ss-qm2-b-200-sc11, ss reducing port connector,1/8"" x 1/16"" tube od , part no. ss-201-pc-1-sc11 "
|